Ranger Wheel Guardian RV1, Инструкция по установке и эксплуатации

Страница: 24 / 80

RV1 Wheel Guardian™ Tire Changer
24
P/N 5900089 — Rev. A — March 2019
Tool Arm Handle
The Tool Arm Handle controls the in and out movement (towards and away from the Wheel/Tire) of the
Upper Tool Arm and the Lower Tool Arm.
Important : The Upper and Lower Tool Arms are synchronized;
they move in and out
together
. However, they move up and down separately (controlled by the Upper and
Lower Tool Arm Controls).
The components of the Tool Arm Handle include:
•
Handle . Pump to move the Tool Arms in and out.
•
Lock Button
. Hold to allow the Handle to move the Tool Arms. Uses pneumatic power. You
cannot move the Tool Arms unless you hold down the Lock Button while pumping the Handle.
• Knob . Controls the direction the Tool Arms move. If they move the “wrong” direction when you
pump the Handle, turn the Knob to the other position and then try again.
To use the Handle, Lock Button, and Knob:
–
Turn the Knob to the right (EXPAND), press the Lock Button, then ratchet the Handle to the
right to move the Tool Arms towards the Tire.
– Turn the Knob to the left (RETRACT), press the Lock Button, then ratchet the Handle to the left
to move the Tool Arms away from the Tire.