Ranger R745, Инструкция по установке и эксплуатации

Страница: 43 / 68

R745 Swing-Arm Tire Changer
43
P/N 5900171 — Rev. C — Dec. 2019
4. Put the Tire over the Wheel, with the side that will be next to the Mount/Demount Head low and
the other side high (above the top of the Wheel).
5. Swing the Mount/Demount Head into position.
6. Bring up the low side of the Tire and put the bottom Tire Bead over the Mount Lip and under the
Demount Lip of the Mount/Demount Head.
Side view. Not to scale.
7. Push the side of the Tire furthest away from the Mount/Demount Head down over that side of the
Rim and Wheel as far as it will go.
8. On the opposite side of the Tire, make sure the bottom Tire Bead is in the Wheel’s Drop Center.
9. Press down on the Turntable Foot Pedal.
The Turntable will turn clockwise and the bottom Tire Bead will drop over the top of the Rim.
10. Put the
top
Tire Bead over the Mount Lip and under the Demount Lip of the Mount/Demount
Head.
Side view. Not to scale.
11. Position the Bead Lifting Tool to the left of the Mount/Demount Head (about 20 percent of the
distance around the Tire), with the Bead Lifting Tool pushing down on the Sidewall of the Tire.