Ranger R745, Инструкция по установке и эксплуатации

Страница: 41 / 68

R745 Swing-Arm Tire Changer
41
P/N 5900171 — Rev. C — Dec. 2019
13. Push the bottom Bead up as much as possible all the way around the Wheel, then push the side of
the Tire opposite the Mount/Demount Head into the Drop Center of the Wheel.
14. Take the Bead Lifting Tool, put it on the outside of the Demount Lip, then slide it down past and
under the bottom Bead.
Side view. Not necessarily to scale.
Getting the Bead Lifting Tool into position may be trickier this time, as the rest of the Tire is in the
way as you are trying to get access to the bottom Bead.
Side view. Not necessarily to scale.
15. Push the Bead Lifting Tool towards the other side of the Wheel in an arc, pulling the bottom Bead
over the Demount Lip of the Mount/Demount Head.
16. While continuing to hold the Bead Lifting Tool, press down on the Turntable Foot Pedal to move
the Turntable clockwise.
Watch the bottom Bead to make sure it is being pushed over the top of the Rim as the Turntable
moves.
17. Keep turning the Turntable until the entire bottom Bead pops over the top Rim.
The Tire is now dismounted and can be removed.