Ranger R745, Инструкция по установке и эксплуатации

Страница: 13 / 68

R745 Swing-Arm Tire Changer
13
P/N 5900171 — Rev. C — Dec. 2019
Unpacking
BendPak Ranger recommends unpacking the Tire Changer as close as possible to its permanent
location. The less you have to move things around, the smoother your unpacking and installing will be.
Note : Many of the Tire Changer components have been greased for shipping. BendPak Ranger
recommends having some rags nearby when unpacking, as you will almost certainly get
grease on your gloves. You will probably want to clean the grease off of the Turntable, the
Mount/Demount Head, and the Shaft Lock Handle, as keeping them greased would hinder
normal operation of the unit. You can keep the Shaft and the Swing Control knob greased.
Use caution when taking the Tire Changer out of its shipping container
. You do not
want to damage the unit, misplace any of the components that come with it, or hurt anyone.
To unpack the Tire Changer :
1. Make sure you are wearing OSHA-approved (publication 3151) Personal Protective Equipment:
leather gloves, steel-toed work boots, back belts, hearing protection, and ANSI-approved eye
protection (safety glasses, face shield, or goggles).
2. At the bottom of the Cover, push the metal tabs all the way down, on all four sides.
You may have to apply some force to get all of the metal tabs free; they sometimes stick.
3. Lift the Cover off.
⚠
CAUTION Ranger recommends having at least two people lift the Cover off; it is heavy and
awkward. If it is dropped or falls, it could cause injury or equipment damage.
4. Remove the plastic wrap around the Tire Changer and other components.
5. Remove the Accessory Box.