Ranger R745 страница 19 Скачать руководство пользователя | Manualshive

Страница: 19 / 68

background image

R745 Swing-Arm Tire Changer

19

P/N 5900171 — Rev. C — Dec. 2019

Connecting to Power

The Tire Changer comes configured for a 110 VAC power source. It can be changed to work with a

220 VAC power source, if desired.

Important

:

The Tire Changer uses pneumatic and electrical energy; if your organization has
Lockout/Tagout policies, implement them once the unit is connected to power.

When you receive it from the factory, the Tire Changer is configured for a 110 VAC power source. You

can confirm this in two ways:
•

Plug

. The Power Cord has a 110 VAC plug on it.

•

Voltage Switch setting

. The Voltage Switch (on the right side of the unit, behind the Lube

Bucket, near the ID Label) is set to the

110V

setting.

If you want to connect the Tire Changer to a 110 VAC power source, simply plug it in to a 110 VAC

power outlet

without changing the setting of the Voltage Switch

. No Electrician is needed to use the

Tire Changer with a 110 VAC power source as it comes from the factory.
To connect the Tire Changer to a 220 VAC power source, you need to do two things:
•

Change the Voltage Selector Switch to 220 V.

•

Change the Plug on the end of the Power Cord to a 220 VAC NEMA 30 Amp Plug.

⚠

DANGER

All

electrical work (including changing a Plug from 110 VAC to 220 VAC)

must

be

done by a licensed, certified Electrician. If you do not use a licensed, certified
Electrician, you void your warranty and put everyone who uses the Tire Changer in

danger of injury or, in rare cases, death.

To switch the Tire Changer to use a 220 VAC power source

:

1.

Make sure the Tire Changer is

not

plugged in to power or air.

If it is, disconnect it.

Do not begin to switch the Tire Changer to 220 VAC until you

are sure that power and air have been disconnected from the unit

.

2.

Cut off the 110 VAC plug on the end of the Power Cord and have an licensed, certified Electrician
attach a 220 VAC NEMA 30 amp plug.
Do not change the 110 VAC plug to a 220 VAC plug unless you are a licensed, certified Electrician.

3.

Change the setting of the Voltage Selector Switch to

220V

.

«
...
17
18
19
20
21
...
»

Содержание R745





































































Отзывы:

Нет отзывов

Похожие инструкции для R745

Бренд: TECO Страницы: 44

Бренд: Mondolfo Ferro Страницы: 332

Бренд: Sealey Страницы: 3

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды