Ranger R745 Скачать руководство пользователя | Manualshive

Страница: 15 / 68

background image

R745 Swing-Arm Tire Changer

15

P/N 5900171 — Rev. C — Dec. 2019

Moving the Tire Changer to its Permanent Location

Once you have installed the Tire Changer’s Tower, you can move it to its permanent location.

⚠

WARNING

Make sure to use an appropriate lifting device, such as a Forklift or Pallet Jack, to
move the Tire Changer while it is on its Pallet. Make sure only personnel who are

experienced with material handling procedures are allowed to move the Tire

Changer. The Tire Changer is heavy and the weight is not evenly distributed;

dropping or knocking over the unit may cause equipment damage or personal
injury. BendPak Ranger recommends having at least two people work together to

move the Tire Changer.

To move the Tire Changer

:

1.

Make sure you are wearing OSHA-approved (publication 3151) Personal Protective Equipment:

leather gloves, steel-toed work boots, back belts, hearing protection, and ANSI-approved eye
protection (safety glasses, face shield, or goggles).

2.

Remove the shipping bolts that hold the Tire Changer to the Pallet.

3.

Move the Tire Changer off the Pallet.
The Tire Changer can be moved off the Pallet using a Forklift under either side.

Use care when

moving the Tire Changer off the Pallet

.

If you prefer lifting the Tire Changer to move it, install the Main Tower/Swing Arm (described in

Installing the Tower

), then use an appropriate lifting device (such as a Shop Crane) with a

strap secured around the top of the Main Tower to move it into place.

4.

Move the Tire Changer to its permanent location.

«
...
13
14
15
16
17
...
»

Содержание R745





































































Отзывы:

Нет отзывов

Похожие инструкции для R745

Бренд: Strongway Страницы: 17

Бренд: WERTHER INTERNATIONAL Страницы: 97

Бренд: Snap-On Страницы: 63

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды