Ranger 191 CAYMAN, Руководство пользователя

Страница: 51 / 78

Electrical System
FISHERMAN SERIES
Navigation and Anchor Lights
The switch that is labeled “Lights” on the bow and console keypads
controls the operation of these lights. On the first key press the Navigation
and Anchor Lights turn on. On the second key press the Navigation Lights
turn off and the Anchor Lights remain on. On the third key press the
Anchor lights turn off.
Aerator System
The switches labeled “Aerator Pumps” and “Aerator Timer” on the bow
and console keypads control the Aerator System. Pressing the “Aerator
Pumps” switch once turns on aerator pump #1. Press a second time and
pump 1 turns off and pump 2 turns on. Press a third time and both pumps
are turned on. The pumps will remain on continuously until the “Aerator
Pumps” switch is pressed for the fourth time. When the pumps are turned
on the “Aerator Timer” switch can be used to start a timed aeration cycle.
Pressing the “Aerator Timer” switch once starts the low aeration cycle of
1 minute on and 2 minutes off. Pressing the switch a second time starts
the medium aeration cycle of 5 minutes on and 2 minutes off. The third
press starts the high aeration cycle of 15 minutes on and 2 minutes off.
The fourth key press will turn off the timer function.
Fuel Level
The switch labeled with a diagram of a fuel pump on the console
keypad, controls which tanks fuel level is displayed on the fuel gauge.
When the “Fuel” switch is pressed this will toggle between tank number 1
and tank number 2. Only tank position number 1 is used on Fisherman
series and toggling to number 2 will cause the gauge to read empty.
Bilge System
The switch labeled “Bilge” on the console keypad controls the Bilge
System. The default condition for the bilge system is power applied to the
float switch. Pressing the “Bilge” switch once turns on the manual bilge
pump. Pressing a second time over-rides the float switch and turns on the
auto-bilge pump. Pressing a third time turns off the manual bilge and the
auto-bilge pumps and reactivates the float switch.
Interior Lights
Pressing the switch labeled “Interior Lights” on the console keypad once
turns on the interior lights. Pressing the switch again turns the lights off.
Once the lights are turned on they will automatically shut off after 5 minutes.
Instrument Lights
The switch labeled “Interior Lights” on the console keypad also controls
the brightness for the instrument lights. Pressing and holding the switch
for approximately 3 seconds will start to dim the instrument lights. The
51