Ranger 191 CAYMAN Скачать руководство пользователя | Manualshive

Страница: 18 / 78

background image

Contact your Ranger dealer for information on proper fuel shutoff valve
access.

SAFETY AND MAINTENANCE TIPS

The fuel system in your Ranger requires little or no maintenance.

However, the periodic inspection outlined below is strongly
recommended. Contact your Ranger dealer for proper fuel tank access for
your model.
(1) Check fuel tank(s) for leakage, especially around electric sender and

fuel hose connections.

(2) Check fuel tank hold down brackets, making sure they are secure.
(3) Check battery hold down or boxes, making sure they are secure.
(4) Do not store items on, in, or around fuel tanks or batteries. “Good

housekeeping” in this compartment is essential to safe boating and a
maintenance-free fuel and electrical system.

(5) Check hose connections at the deck fuel fill, fuel tank vent, and (if

equipped with more than one tank), the fuel switch valve.

Naturally, a leak-free fuel system is a MUST for proper engine operation

and on-board safety. Always inspect for fuel leaks prior to connecting
battery charger to your engine cranking battery. Rear battery
compartment lid should always be open for ventilation when charging the
batteries.

18

▲

!

Avoid serious injury or death from fire or

explosion resulting from leaking fuel.

Inspect system for leaks at least once a year.

WARNING

▲

!

Maintenance or repairs should be
performed by your Ranger dealer or other

qualified personnel.

CAUTION

▲

!

Fuel vapors are a fire and explosion
hazard. Do not store fuel or flammable

liquids in boat. Ventilation has not been provided.

WARNING

Fuel System

«
...
16
17
18
19
20
...
»

Содержание 191 CAYMAN















































































Отзывы:

Нет отзывов

Похожие инструкции для 191 CAYMAN

Бренд: Advanced Elements Страницы: 20

Бренд: COBIA Страницы: 41

Бренд: Walker Bay Страницы: 13

CASCADE BT-21CAP

Бренд: Aqua-Marina Страницы: 68

2550 Console Cabin

Бренд: PURSUIT Страницы: 29

Бренд: Alliaura Marine Страницы: 44

Бренд: YAMARIN Страницы: 44

Бренд: David Walters Страницы: 13

Бренд: Walker Bay Страницы: 18

Бренд: Galaxy Страницы: 24

Бренд: KAYAKS2FISH Страницы: 20

303 Single Seater

Бренд: Access Dinghy Sailing Страницы: 4

Бренд: Xtreme Страницы: 3

16-17 SLIDE (LARGE)

Бренд: Aquaglide Страницы: 28

340 SPORT YACHT

Бренд: MONTGOMERY BOATS Страницы: 191

Sport Yacht 330

Бренд: Monterey Boats Страницы: 186

Бренд: Kolibri Страницы: 15

Бренд: Hunter Marine Страницы: 128

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды