Ranger 191 CAYMAN Скачать руководство пользователя | Manualshive

Страница: 6 / 78

background image

Be Responsible For Safer Boating

BE RESPONSIBLE FOR SAFER BOATING

•

ALCOHOL and DRUGS -

The debilitating effects of alcohol and other

drugs reduces reaction time and detracts from judgment. The
combined effect of the outdoor environment… sun, heat, wind, rough
water, and noise can be more fatiguing than one would imagine and,
combined with drugs or alcohol, can be very dangerous.

•

GAME PLAN -

Tell a friend, neighbor or another family member where

you will be boating and when you plan to return. Be certain that this
individual has a good description of your boat and any other identifying
information that could be needed to help find you should an emergency
arise.

•

TOOLS and SPARE PARTS -

Many people have been stranded by

minor breakdowns that they could have repaired themselves. It is a
good idea to carry a few tools and common spare parts and to be
familiar with simple repairs that you can easily accomplish.

•

GASOLINE RESERVES -

Never push your boating range to the limit of

your gas tank capacity… one-third of the fuel to go, one-third to come
back and one-third to reserve.

•

GOOD BOAT KEEPING -

A clean boat is a safer boat. Take care to see

that rods, lures, nets, gaffs and other potentially harmful gear are
properly stowed so that it cannot blow or move around while the boat is
underway. Perform all maintenance and safety checks regularly. Secure
all icebox or cooler lids and place any trash or debris safely under cover
until the trip is over.

•

SPEED and SKILL -

The fast and powerful boat can require the

operator to exercise a high level of skill and attention to driving. Only go
as fast as your skill and good judgment dictates is safe. You are in
charge of the well being of your passengers and yourself. Be alert for
any hazards in the water and operate your boat only in such a manner
as would be appropriate for the water conditions. Be a good boating
“neighbor” and do not create a hazard or annoyance to others. The best
safety equipment is your own good judgment.

•

SKIERS

and

SWIMMERS -

Do not allow operation of the engine when

anyone is in the water near the stern of the boat. Never back up to a
down skier or anyone in the water. Never drive your boat directly behind
a skier.

6

«
...
4
5
6
7
8
...
»

Содержание 191 CAYMAN















































































Отзывы:

Нет отзывов

Похожие инструкции для 191 CAYMAN

Бренд: Axopar Страницы: 44

Бренд: Axopar Страницы: 68

Бренд: Grady-White Boats Страницы: 72

Бренд: Grady-White Boats Страницы: 74

Бренд: Grady-White Boats Страницы: 86

Бренд: Grady-White Boats Страницы: 112

Бренд: Sea-doo Страницы: 123

Бренд: Cape Dory Страницы: 94

Бренд: Alliaura Marine Страницы: 78

Бренд: Pelican Страницы: 2

Бренд: Mercury Страницы: 36

Бренд: Mercury Страницы: 40

Quicksilver 200 Tendy Slatted

Бренд: Mercury Страницы: 63

Бренд: Walker Bay Страницы: 17

HAPPY CAT LIGHT

Бренд: grabner Страницы: 44

Бренд: Bavaria Страницы: 85

Бренд: Malibu Boats Страницы: 170

Бренд: Bayliner Страницы: 96

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды