Ranger Products RX3040, Инструкция по установке и эксплуатации

Страница: 39 / 74

39
Removing Lower Bead
1. Move the Tool Head up and retract the Tool Head in.
2. The Tool Head should be with the Tab positioned up.
3. With the Tool Head fully retracted, move the Tool
Head Assembly down to it’s lowest position.
(See Fig. 11.33)
4. Position the Drop Center Tool as shown to bring the
lower Bead up onto the Tire’s Drop Center.
(See Fig. 11.34)
5. Raise Drop Center Tool until lower bead is in drop
center. (See Fig. 11.35)
6. Push the Target Lock™ button and Hold, the Tool
Head Tab will extend to the preset position 1/4” from the
rims edge.
7. Use the video assist feature to guide the Tool Head Tab
under the tire’s lower Bead. (See Fig. 11.36 - 11.37)
8. Raise Tool Head Tab Until the lower bead is above
the upper Rim Lip. (See Fig. 11.38)
9. Keep the Lower Bead in the Drop center of the Rim.
Fig. 11.33
Fig. 11.34
Fig. 11.35
Fig. 11.38
Fig. 11.37
Fig. 11.36