Ranger Products RX3040, Инструкция по установке и эксплуатации

Страница: 34 / 74

34
11. Place the Quick Nut over the Post spin and hand
tighten the Quicken Nut. (Squeeze the Quick Nut red
handles to drop Quick Nut over post then release and
tighten.) (See Fig. 11.6)
9. Press the Switch for the Upper Bead Breaker Roller
down to lower the Upper Bead Breaker Roller.
11. Lower the Roller Assembly approximately 4 inches to
provide clearance to flip down the Upper Bead Breaker
Roller assembly. (See Fig. 11.7)
11. Flip Down the Upper Bead Breaker Roller.
(See Fig. 11.8)
12. Lower the Upper Bead Breaker Roller to within about
an inch of the tire Rim.
13. Use the Center Post Control and the Upper Bead
Breaker Control to bring the Upper Bead Breaker Roller
to within 1/8”-1/4’ of the Rim edge. (See Fig. 11.9 - 11.11)
CAUTION!
DAMAGE CAUSED BY STRIKING OR HITTING
THE QUICK-NUT WITH A HAMMER, TIRE IRON
OR HEAVY OBJECT IS NOT COVERED
UNDER WARRANTY!
Fig. 11.8
Fig. 11.6
Fig. 11.7
Fig. 11.9
Fig. 11.10