Ranger Products RX3040, Инструкция по установке и эксплуатации

Страница: 13 / 74

13
SECTION 7
AIR SOURCE
This model requires a 14 to 15 CFM air source at
45-165 PSI minimum pressure. The safe operating pressure
range for this model is between 140 PSI and 165 PSI at the
machine.
1. Connect the Air Supply to the Air Oil Regulator. The unit
is furnished with a 1/4” pipe thread female fitting for easy
connection. This connection is located on the right side of
the rear of the machine. A 1/4” ID hose (or pipe) for
connection to the machine is satisfactory. Sufficient air
pressure assures good performance. (See Fig. 7.1)
2. Adjust Pressure by turning knob at the top of the Air
Regulator and reading the Pressure on the Gauge at the top
of the Air Tank/Tower. (See Fig. 7.2)
3. Drain water, fill oil and adjust the flow of oil as shown on
page 27.
Fig. 7.1
Fig. 7.2
WARNING!
CHECK THAT THE TURBO-BLAST VALVE IS
CLOSED BEFORE CONNECTING ANY AIR
SOURCE. IF VALVE IS OPEN, AIR BLAST OR
HOSE MOVEMENT MAY DAMAGE PERSONNEL
OF MACHINE.