Ranger Products R980X, Инструкция по установке и эксплуатации

Страница: 22 / 52

22
19. Insert the smooth curved end of Bead Lifting Tool over
the right end knob of the mount/demount head and below
the top bead of the tire. (See Fig. 11.16)
20. Push the Bead Lifting Tool down toward the wheel to lift
the tire bead up and over the “duckbill” of the demount head.
Hold the Bead Lifting Tool in this position. (See Fig. 11.17)
19. Depress the Table Top Foot Pedal to rotate the wheel
clockwise. (See Fig. 11.18)
20. Hold the Bead Lifting Tool down until the upper bead is
solidly above the rim. Continue rotating the wheel clockwise
until the upper bead is completely demounted.
(See Fig. 11.19 - 11.21)
DANGER!
The Bead Lifting Tool and demount head may
encounter resistance or come under load at times
during the mount and demount procedures. Keep
one hand firmly on the tool to avoid possible tool
kick back. Use the reversing feature (lift table top
pedal upwards) to back out of jam ups.
NOTE:
The Following Procedures show
optional equipment being used;
The Tire Changer you are using may not have
the Assist Tower Option.
Fig. 11.16
Fig. 11.17
Fig. 11.18
Fig. 11.19
Fig. 11.20
Fig. 11.21