Rangemaster Ice Maker, Инструкция по эксплуатации и техническому обслуживанию

Страница: 6 / 8

Before Calling for Service
Check plug and fuse. Test outlet with lamp. Be sure
rocker switch is on. Read installation, operation, &
maintenance instructions. Your questions may be
answered. If not, find your model number on the lower
section inside the door. Refer your number and problem
to the Service Department.
What To Do
If You Need Service
Before calling for service, check the trouble shooting
table. This table lists possible problems that you can rem-
edy without difficulty to avoid an unnecessary service call.
If you do need service, contact your dealer or the manu-
facturer. In any correspondence, refer to the model num-
ber and serial number of your unit which is located on the
lower inside of the door. Retain your proof of purchase.
You may want to record these numbers in the space pro-
vided. Follow the procedure outlined on page 7.
Rangemaster Customer Care
Help With Problems
If you have difficulty , or a problem with your appliance,
this leaflet will help you to resolve the matter.
Please complete the appliance details below and keep
them safe for future reference - this information will
enable us to accurately identify your particular appliance
and help us to help you. Filling this in now will save you
time and inconvenience if you later have a problem with
your appliance. It may also be of benefit to keep your
purchase receipt with this leaflet. You may be required
to produce the receipt to validate a warranty field visit.
Date of Purchase
Dealer’s Name
Dealer’s Address
Dealer’s City
Dealer’s County Postcode
Appliance Serial No.
Model No.
6
Problem
Not enough cubes, but solid
Ice cubes are uneven
(Tapered)
Ice maker won’t make ice
Ice cubes are translucent
Too much water coming in
and spilling over.
Possible
Causes/Solutions
• Fan motor not running.
• Condenser coil behind
grille needs cleaning.
• Room too hot.
• Unit not level.
• Water supply shut off.
• Power switch in “OFF”
position.
• No current at the wall
outlet.
• Ejector blades are frozen.
Defrost the unit.
• Normal. Air trapped in the
water due to fast freezing.
• Water valve switch needs
adjustment. Remove Ice
Maker control cover and
adjust screw.