Cleaning of the Condenser:
The condenser behind the
air grille should be cleaned periodically or more fre-
quently if severe dust conditions prevail. This will insure
peak ice maker performance.
To reach the condenser, remove the grille at bottom of
unit by removing the screw at each end of the grille and
pulling the grille gently down without damaging or
removing the wires to the rocker switch.
Use a long handled paint brush to loosen dust and lint
from the condenser fins. Use of a thin nozzle vacuum
cleaner is also recommended.
To Defrost the Ice Maker
1. Push the rocker switch located on the grille to the
“OFF” position.
2. Remove the ice bucket and place a towel in the
lower front area of the ice maker to absorb the
defrost water.
3. After defrosting is completed replace the ice buck-
et and press the rocker switch to the “ON” position.
Warning: Do not use an ice pick, knife or any type of
sharp object to remove the ice.
Doing so could puncture
the unit’s refrigerant system and damage it beyond
repair. You may speed up defrosting by filling the ice
bucket with hot water and placing it back in position.
Help Prevent Tragedies.
Each year children die because they climb inside a
discarded refrigeration product, get trapped inside
and suffocate. Take precautions to prevent such
tragedies by removing the door, taping or chaining it
shut before discarding.
Disposal
When you dispose of this product, do so in a way sym-
pathetic to the environment. For further information con-
tact your local authority.
5
Содержание Ice Maker
Страница 1: ...Ice Maker Installation Operation Maintenance Instructions...
Страница 8: ...41008457 Rev A...
