Rangemaster Ice Maker, Инструкция по эксплуатации и техническому обслуживанию

Страница: 3 / 8

If you replace the fuse, the cover must be refitted. If the
cover is lost, the plug must not be used until a replace-
ment has been obtained from your supplier. The colour
of the fuse cover is that of the insert in the base of the
fuse recess or elsewhere on the plug. Always state this
colour when ordering a replacement cover.
If your appliance has a moulded plug, you do
NOT have to do the following assembly as shown
in Figure 1. Appliances with moulded plugs are
ready to use as is.
Important: The wires should be connected to the ter-
minals of the plug as follows:
Earth to the terminal marked E or
coloured Green or Green/Yellow.
Neutral to the terminal marked N or
coloured Black or Brown
Live to the terminal marked L, or coloured
Red or Brown
When wiring the plug, ensure that all strands of wire
are retained in each terminal. The flexible mains
cable, plug and socket must not be exposed to flue
products or be allowed to come in contact with a hot
surface. The cable must not be trapped or pulled taut
when the appliance is pushed into position.
Energy Saving Tips
Reduce door openings.
Close the door as soon as you can.
Keep the coils on the bottom of the ice maker clean.
Keep your ice maker away from the stove or other
heat sources.
Things To Remember
Allow 24 hours for your ice maker to reach a new
temperature setting.
The motor will start and stop often. It must do this to
maintain the temperature you select.
Keep your ice maker reasonably level.
Unplug the ice maker before working on anything
with the electrical system.
3
Under Counter Ice Maker Specifications
Dimensions W x H x D (mm) 375 x 864 x 559
Weight 37 kg
Ice Storage Capacity 5.4 kg
Ice Production Capacity 5.0 kg/day
Power Supply 230V
supplied with a 13 amp plug
Green/Yellow
(earth)
Blue
(neutral)
Fuse (13A)
Brown
(live)
Plug in the mains cable and switch on the electricity supply.
Figure 1