R&S SMBV100B, Начало работы

Страница: 62 / 89

Trying Out the Instrument
R&S
®
SMBV100B
60 Getting Started 1423.1049.02 ─ 02
The minimum requirement for R&S SMBV100B in this example is a base unit
equipped with:
●
Option EUTRA/LTE R&S SMBVB-K55
●
Option frequency R&S SMBVB-B103
To generate a downlink test signal
The main focus of the following example is not on the R&S SMBV100B capabili-
ties and the features provided by the firmware option. The example aims rather to
help you get familiar with the settings and configuration principle common for the
digital standards.
We use one of the provided EUTRA test models (E-TM) to show how to generate
a test signal upon a quick selection.
1. On the R&S SMBV100B front panel, press the Preset key to start out in a
defined instrument configuration.
2. In the block diagram, select "Baseband > Beyond 3G Standards > EUTRA/
LTE".
The EUTRA/LTE dialog appears and displays the general settings provided for
the digital standard.
Generating an EUTRA/LTE Signal