![background image](http://html2.mh-extra.com/html/rands/smb100b/smb100b_getting-started_3077370041.webp)
Trying Out the Instrument
R&S
®
SMB100B
41
Getting Started 1422.1045.02 ─ 03
a) Select "Mode > Auto" to run the sweep continuously.
b) Select "Shape > Sawtooth" to set the waveform shape of the sweep signal.
c) Select "Spacing > Linear", to determine the calculation method for the fre-
quency shift of a step.
d) Set "Dwell Time > 15.0 ms", to determine the time interval of the sweep
steps.
5. Select the "Frequency Range" tab.
Generating an RF Frequency Sweep Signal