R&S SMB100B, Начало работы

Страница: 24 / 61

Preparing for Use
R&S
®
SMB100B
24 Getting Started 1422.1045.02 ─ 03
d) Torque the nut to the specified limit using a calibrated torque wrench. Hold
the opposite connector part stationary with a spanner.
For torque limits of the most relevant connector types, see
Table 4-1 .
3. Torque the nut to the specified limit using a calibrated torque wrench. Hold the
opposite connector part stationary with a spanner.
For more information, see chapter "Handling" of the application note 1MA99 .
Table 4-2: Connector types and torque limits
Type Torque limit Nut opening
lb-Inch Nm Inch mm
N 13.3 1.5 3/4 20
SMA 5 0.56 5/16 8
3.5 mm 8 0.9 5/16 8
2.92 mm 8 0.9 5/16 8
2.4 mm 8 0.9 5/16 8
1.85 mm 8 0.9 5/16 8
1.0 mm 3 0.34 0.236 6
4.11 Switching On or Off
The following table provides an overview of power states, LEDs and power switch
positions.
Table 4-3: Overview of power states
State LED Position of power switch
Off
gray
[0]
Standby
yellow
orange
[I]
Ready
yellow
[I]
Switching On or Off