R&S SMB100B, Начало работы

Страница: 15 / 61

Preparing for Use
R&S
®
SMB100B
15 Getting Started 1422.1045.02 ─ 03
4 Preparing for Use
This chapter describes the basic steps to be taken when setting up the
R&S
SMB100B for the first time.
4.1 Lifting and Carrying
See also "Lifting and carrying the product" on page 9.
► Use the carrying handle at the side for lifting and carrying the R&S SMB100B.
For mounting the R&S SMB100B in a rack, see Chapter 4.4.2, "Mounting the
R&S SMB100B in a Rack" , on page 17.
4.2 Unpacking and Checking
1. Unpack the R&S SMB100B carefully.
2. Retain the original packing material. Use it to protect the control elements and
connectors when transporting or shipping the R&S SMB100B later.
See also chapter "Transporting" in the user manual.
3. Using the delivery notes, check the equipment for completeness.
4. Check the equipment for damage.
If the delivery is incomplete or equipment is damaged, contact
Rohde
& Schwarz.
4.3 Choosing the Operating Site
Specific operating conditions ensure accurate measurements and avoid damage
to the R&S
SMB100B and connected devices. For information on environmental
conditions such as ambient temperature and humidity, see the data sheet.
Choosing the Operating Site