Instrument Tour
R&S
®
SMB100B
33
Getting Started 1422.1045.02 ─ 03
Figure 5-3: Rear panel view R&S
SMB100B RF Signal Generator
1 = IEC 625/IEEE 488 connector
2 = USB In connector (type micro-B)
3 = LAN connector
4 = USB connector (type A)
5 = AC power supply connection and main power switch
6 = S/P Dif digital stereo signal input connector (BNC)
7 = Stereo L/R analog stereo modulation signal input connectors (BNC)
8 = Ref In 1GHz and Ref Out 1GHz connectors (SMA)
9 = Ref In and Ref Out connectors (BNC)
10 = LF output connector (BNC)
11 = Mod. Ext. input connector (BNC)
12 = Pulse Video and Pulse Ext. connectors (BNC)
13 = Signal Valid output connector (BNC)
14 = Inst Trig input connector (BNC)
15 = Serial number (six digits in the string 1400.1000.02-<serial number>-<checksum>)
5.2.1
Connectors
IEC 625/IEEE 488
Option: R&S
SMBB-B86
General purpose interface bus (GPIB) interface for remote control of the instru-
ment. The interface is in compliance with the standards IEC 625, IEEE 488 and
SCPI.
Use this interface to connect a computer for remote control of the R&S
SMB100B.
To set up the connection, use high-quality shielded cables. See
and electromagnetic interference (EMI)"
See also "Annex: Hardware Interfaces" and chapter "Network and Remote Con-
trol" in the user manual.
Rear Panel Tour
