R&S NRP18S, Руководство пользователя, Страница: 172 / 184

Remote Control Basics
R&S
®
NRPxxS(N)
172 User Manual 1177.5079.02 ─ 10
Bit No. Meaning
11 Lower limit fail status register
This bit is set if a displayed value has dropped below a lower limit value.
See Chapter 11.3.8.5, "Operation Lower Limit Fail Status Register" , on page 174.
12 Upper limit fail status register
This bit is set if a displayed value has exceeded an upper limit value.
See Chapter 11.3.8.6, "Operation Upper Limit Fail Status Register" , on page 174.
13 to 14 Not used
15 Bit 15 is never used.
11.3.8.1 Operation Calibrating Status Register
The
CONDition
register contains information about whether a sensor is calibrated
and, depending on the configuration of the transition register. The
EVENt
register indi-
cates whether a calibration was started or completed since the last readout of this reg-
ister.
Querying the register:
●
STATus:OPERation:CALibrating:CONDition?
●
STATus:OPERation:CALibrating[:SUMMary][:EVENt]?
Table 11-11: Meaning of bits used in the operation calibrating status register
Bit No. Meaning
0 Not used
1 Sensor calibrating
The sensor is being calibrated
5 to 15 Not used
11.3.8.2 Operation Measuring Status Register
The
CONDition
register contains information about whether a measurement is being
performed by a sensor and, depending on the configuration of the transition register.
The
EVENt
register indicates whether a measurement was started or completed since
the last readout of this register.
Querying the register:
●
STATus:OPERation:MEASuring:CONDition?
●
STATus:OPERation:MEASuring[:SUMMary][:EVENt]?
Status Reporting System