R&S FSW-K7, Руководство пользователя

Страница: 279 / 407

Remote Commands for Analog Demodulation Measurements
R&S
®
FSW-K7
279 User Manual 1173.9240.02 ─ 23
11.4.8.6 Scaling for AF Evaluation
These settings are only available for AF evaluations.
Useful commands described elsewhere:
●
[SENSe:]ADJust:SCALe[:Y]:AUTO[:CONTinuous]
on page 286
●
[SENSe:]ADEMod<n>:AF:COUPling
on page 267
●
DISPlay[:WINDow<n>]:TRACe<t>:Y[:SCALe]:RPOSition
on page 250
●
DISPlay[:WINDow<n>]:TRACe<t>:Y:SPACing
on page 251
Specific commands:
DISPlay[:WINDow<n>]:TRACe<t>:Y[:SCALe]:RVALue
...................................................... 279
DISPlay[:WINDow<n>]:TRACe<t>:Y[:SCALe]:RVALue <Value>
This command defines the reference value assigned to the reference position in the
specified window. Separate reference values are maintained for the various displays.
Suffix:
<t>
.
irrelevant
Parameters:
<Value> *RST: AM time domain: 0 PCT; FM time domain: 0 Hz;
PM time domain: 0 rad; AM spectrum: 100 PCT;
FM spectrum: 250 kHz; PM spectrum: 10 rad;
Example: DISP:TRAC:Y:RVAL 0
Sets the value assigned to the reference position to 0 Hz
Manual operation: See "Reference Value" on page 121
11.4.8.7 Scaling for RF Evaluation
These commands are required for RF evaluations and the result summary.
●
DISPlay[:WINDow<n>]:TRACe<t>:Y[:SCALe]:RPOSition
on page 250
●
DISPlay[:WINDow<n>]:TRACe<t>:Y:SPACing
on page 251
●
DISPlay[:WINDow<n>]:TRACe<t>:Y[:SCALe]
on page 249
●
DISPlay[:WINDow<n>]:TRACe<t>:Y[:SCALe]:MODE
on page 249
11.4.8.8 Units
The units define how the demodulated data is displayed.
UNIT<n>:ANGLe
............................................................................................................279
UNIT<n>:THD
................................................................................................................280
UNIT<n>:ANGLe <Unit>
This command selects the unit for angles (for PM display, <n> is irrelevant).
Configuring the Measurement