R&S FSW-K7, Руководство пользователя

Страница: 53 / 407

Configuration
R&S
®
FSW-K7
53 User Manual 1173.9240.02 ─ 23
The default input source for the R&S FSW is "Radio Frequency", i.e. the signal at the
RF INPUT connector of the R&S FSW. If no additional options are installed, this is the
only available input source.
Since the Digital I/Q input and the Analog Baseband input use the same digital signal
path, both cannot be used simultaneously. When one is activated, established connec-
tions for the other are disconnected. When the second input is deactivated, connec-
tions to the first are re-established. This may cause a short delay in data transfer after
switching the input source.
External mixers are not supported in MSRA/MSRT mode.
● Radio Frequency Input ............................................................................................53
● External Mixer Settings ........................................................................................... 55
● Digital I/Q Input Settings ......................................................................................... 65
● Analog Baseband Input Settings .............................................................................68
● Probe Settings .........................................................................................................70
● External Generator Control Settings ....................................................................... 71
● Settings for 2 GHz Bandwidth Extension (R&S FSW-B2000) .................................79
5.3.1.1 Radio Frequency Input
Access : "Overview" > "Input/Frontend" > "Input Source" > "Radio Frequency"
Radio Frequency State ................................................................................................. 53
Input Coupling ............................................................................................................... 54
Direct Path .................................................................................................................... 54
High-Pass Filter 1...3 GHz ............................................................................................ 54
YIG-Preselector .............................................................................................................55
Input Connector .............................................................................................................55
Radio Frequency State
Activates input from the RF INPUT connector.
Input and Frontend Settings