EB200 Manual
Operation
4052.2000.02 3.45
E-7
3.18.5 DISPLAY (display variants)
This menu is obtained by pressing the DISPLAY softkey in the MAIN menu.
With this menu, you can select quickly from a number of display variants. This permits parameters
important for a particular task to be put to the foreground.
Using the MORE softkey, further parallel selection modes can be chosen.
Each display variant has its own specific CONFIG menu.
The selected variant is maintained even if the MAIN menu or any other menu is called up. When the
DEFAULT has been selected, in submenus M-SCAN and F-SCAN the display variant specific for these
modes will be shown. With D-SCAN there are no variable display variants.
DEFAULT - CONFIG
This menu is obtained by pressing the CONFIG softkey in the DISPLAY menu
Configuration parameters
DISPLAY MODE:
INVERSE, NORMAL (this setting is global)
ILLUMINATION:
Illumination of back lighting OFF / STEP1 ... STEP6
SWITCH OFF:
Switch-off time of back lighting
NEVER, 0.5 MIN, 1 MIN, 2 MIN, 3 MIN, 5 MIN, 10 MIN, 20 MIN
TUNING AID:
Display variations of frequency offset (see "Offset display, " on page 9)
NUMERIC, SYMBOLIC, IF PAN (option)
LOW BAR LIMIT:
Setting of the lower end of scale
of the level bargraph at ATT OFF:
-30 dBµV, -10 dBµV, 10 dBµV
