Page
22
of
47
CP0485
R&G Racing
Unit 1, Shelley’s
Lane, East Worldham, Alton, Hampshire, GU34 3AQ
Tel: +44 (0)1420 89007 Fax: +44 (0)1420 87301
PLEASE NOTE THE CRASH PROTECTOR MUST BE POSITIONED AS IN AERO-
STYLE CRASH PROTECTOR ORIENTATION DIAGRAM ON PAGE 3, WITH
BIGGER END TOWARD FRONT OF BIKE.
o
Turn a little more so that you feel the compression increase slightly. Then
apply a quarter turn. Do not over tighten as damage can occur to the
bike. Do not exceed 40Nm of torque.
•
Re-fit the small plastic cover by the rear shock on the left side of the bike.
•
Re-fit the upper fairing on the right and lower fairings on both sides of the bike
by reversing the steps for each panel ensuring all bolts are returned to their
correct location.
•
Ensure all fairings are correctly fitted with all bolts fully tightened.
•
Fit crash protector caps (item 6) into both crash protectors.
•
Before riding, check both sides are secure, and the crash protectors cannot
rotate.
•
Check tightness of each side regularly.
ISSUE 1 02/03/2020 (DM)
CONSUMER NOTICE
The catalogue description and any exhibition of samples are only broad indications of the Products and
R&G may make design changes which do not diminish their performance or visual appeal and supplying
them in such state shall conform to the order. The Buyer acknowledges no representation or warranty
(other than as to title) has be
en given or will apply to the Products other than those in R&G’s order or
confirmation and the Buyer confirms it has chosen the Products as being of merchantable quality and
suitable for its particular purposes. Where R&G fits the Products or undertakes other services it shall
exercise reasonable skill and care and rectify any fault free of charge unless the workmanship has been
disturbed. The Buyer is responsible for ensuring that the warranty on the motorcycle is not affected by
the fitting of the Products. On return of any defective Products R&G shall at its option either supply a
replacement or refund the purchase money but shall not be liable if the Products have been modified or
used or maintained otherwise than in accordance wi
th R&G’s or manufacturer’s instructions and good
engineering practice or if the defect arises from accident or neglect. Other than identified above and
subject to R&G not limiting its liability for causing death and personal injury, it shall not be liable for
indirect or consequential loss and otherwise its liability shall be limited to the amounts paid by the
Buyer for the Products or the fitting or service con
cerned. These terms do not affect the Buyer’s
statutory rights.
R&G RACING RETURNS POLICY (NON-FAULTY GOODS)
Returns must be pre-authorised (if not pre-authorised the return will be rejected). Goods may only be
returned direct to us if they were purchased direct from us (customer must prove if necessary).
Otherwise to be returned to original vendor. Goods must be in re-sellable condition, in the opinion of
R&G Racing. All returns are subject to a 25% restocking and handling fee (25% of the gross value exc.
P&P
–
at the prevailing price at time of purchase). The customer must pay any and all carriage
charges. No returns of discontinued products, unless within 14 days of purchase. This policy does not
affect your statutory rights and does not refer to faulty goods.