Rancilio Epoca S, Руководство по эксплуатации и обслуживанию

Страница: 49 / 72

58
1. GENERAL SAFETY RULES
●
Don’t leave the packing elements (plastic bags,
expanded polystyrene, nails, cardboard, etc.) within
the reach of children, as these elements are
potential sources or danger.
●
Check that the data on the machine corresponds
to that of the electrical supply network, before
connecting the equipment.
●
Adaptors, multiple sockets and /or extensions must
not be used.
●
In doubt, request an accurate control of the plant
by qualified personnel. The electric plant must be
provided with the following safety devices:
- efficient earth connection;
- section of conductors suitable for absorption
capacity
- efficient earth leakage protection circuit breaker.
●
Install the machine on a water repellent surface
(laminate, steel, ceramic, etc.) away from heat
sources (oven, cooking stove, fireplace, etc.) and
in conditions in which the temperature may not go
below 5°C. KEEP WARM.
●
Do not leave the machine exposed to atmospheric
agents or place them in damp rooms such as
bathrooms.
●
Do not obstruct the suction or dispersion grilles
and do not cover with cloths, etc.
●
Keep the packed machine in a dry place, not
exposed to atmospheric agents and in conditions
in which the temperature does not go below 5°C.
Do not stack more than three items of the same
kind. Do not place heavy items on the packaging.
●
In an emergency, such as the breaking out of a
fire, unusual noise, overheating, etc., take imme-
diate action, disconnecting the power and closing
gas and water taps.
●
Only use original spare parts in order to avoid
compromising the safety and proper functioning
of the machine.
Erroneous installation can cause damage to
people, animals and things for which the
manufacturer cannot be considered
responsible
2. DESCRIPTION
The machines in the EPOCA series have been
designed to prepare express coffee and hot
beverages.
A positive-displacement pump inside the machine
powers the heater in which the water is heated. By
pressing the appropriate buttons, water is supplied
to the spouts in the form of hot water or steam,
according to needs.
The water to be used for the beverages is supplied
directly by the water supply, pressurized by the pump
and immediately heated by the steam produced by
the boiler or from an incorporated tank containing a
softener for softening the water by trapping calcium
salts.
The machine is composed of a steel carrying structure
on which the mechanical and electrical components
are fitted. These are completely covered with panels
made of painted polyurethane and stainless steel.
The beverages are dispensed at the front of the
machine, where all the buttons, control devices and
dispensers are to be found.
There is a cup-warming plate on the top of the
machine.