Rancilio EGRO 55 Series, Техническое руководство

Страница: 85 / 114

6.6 PM GUIDE
- Section 6: Page 12 -
EGRO 55 SERIES TECHNICAL MANUAL
5.
TEST WATER HARDNESS
5.1 Test water hardness and record GPG on PM Checklist/sign-off sheet.
6.
REPLACE WATER FILTRATION AND SOFTENING CARTRIDGES
6.1 Replace in line water fi ltration and softening cartridges.
PLEASE NOTE: Please follow instructions from softener/fi ltration manufacturer for fl ushing fi lters prior to installing
them.
8.
CHECK TOTAL CYCLES AND TOTAL NUMBER OF CLEANINGS PERFORMED AND
RECORD ON CHECKLIST
8.1 Enter programming mode and make note of total cycles, total cycles since last PM and total number of cleanings on
PM checklist form.
- SERVICE MENU/Cycles
- SERVICE MENU/P-Serv
- SERVICE MENU/C-Cleanings
9.
RESET SERVICE COUNTER
9.1 Enter programming mode to clear the service counter. This is the counter which tells the user to call for service.
- SERVICE MENU/CLR P-Serv.
P
ROGRAMMING
M
ENU
D
IAGRAM
.
To access the programming menu. Insert key and turn to right. Enter Pin code: 1849 using numbers on keypad. Scroll through
programming until you reach the SERVICE menu. Enter SERVICE menu using the number 1 button. Refer to Section 3 for more details.
7.
TEST WATER HARDNESS -- AGAIN, AFTER THE SOFTENING SYSTEM IS INSTALLED
7.1 Test water hardness and record GPG on PM Checklist/sign-off sheet.
9 8
STEPS FOR PM TYPE 1: EXCHANGING THE BGA
USING A NEW OR REBUILT BREW GROUP ASSEMBLY (BGA)
10.
TURN MACHINE ON*
10.1 Turn machine on.
10.2 Turn key to right and verify that the machine is in M_1: Normal.
*PLEASE NOTE: If this is a Type 2 PM please skip this step
and continue directly to Step 12
Config1...
Service...
Products... Config2...
X X
X
Product Total
X
Total number of brewing cycles. Not reset-able. Cycles
Displays the number of brewing cycles since the last CLR P-Serv.
P-Serv
Clears the P-Serv, C-Cleanings, and M-Cleanings counters and sets them to zero
CLR P-Serv
Displays the number of coffee cleanings since the last CLR P-Serv.
C-Cleanings