Rancilio EGRO 55 Series, Техническое руководство

Страница: 41 / 114

- Section 3: Page 16 -
E55_TM_programmingV3
©
Copyright 2008. Rancilio North America
EGRO 55 SERIES TECHNICAL MANUAL
Temperature
3.5 CONFIG 2 MENU
Config1... Service... Products...
Config2...
X X
X
Product Total
X
Confi g 2 Menu contains parameters for making adjustments to the machine that do not effect the specifi c drink parameters.
Specifi es whether the steam boiler should be fi lled with or without using the machines pump. If the water line is not
pressurized, or it does not have enough pressure this should be set to 0.
0 = Fills with machine’s pump
1 = fi lls without machine’s pump
Enables or disables the erase function in the product counter menu.
0 = Erasing not possible
1 = Erasing possible
Identifi es the type of steam wand that is present on the machine.
Specifi es the temperature in Celsius at which the TS wand will shut off.
(Options: 40 - 99 C)
S-Filling
Auto-Steam
Ref. Temp. AS
PT-Clear
Cleaning request function. Use this feature to set a cleaning alert after a specifi ed number of drinks have been
produced. The alert will remain on the screen until the cleaning has been carried out.
0 = No cleaning alarm
1 - 1000 = number of drinks before alert is displayed
C-Request
SOFTWARE VERSIONS 1.00 - 2.09
0 = NO TS wand present
1 = TS wand is present
SOFTWARE VERSIONS 1.00 - 2.09
0 = NO TS wand present
1 = TS wand is present with steam pressure control
2 = TS wand without steam pressure control
3 = iSteam wand present
ISTEAM SETTINGS: ONLY VALID WHEN ISTEAM WAND IS PRESENT
E-degree
iButton Foam
iButton Foam: This submenu contains the programming for the temperature and emulsion levels of the cappuccino
button or left side button on the iSteam wand.
Use this parameter to set the fi nal temperature of the steamed and frothed milk for the cappuccino button on the
iSteam wand. This temperature is in Celsius.
Use this parameter to set the emulsion level or foaming level associated with the cappuccino button on the
iSteam wand. OPTIONS: 0 - 6.
PLEASE NOTE: For all settings 1, 2, 3, 4, and 5, the iSteam will add air to the steaming
process and shut air off prior to reaching the fi nal temperature. For example, if you set this parameter to 5 the iSteam will begin
steaming with air infused, shortly before it reaches it’s fi nal temperature it will stop infusing air and simply steam. This will result in
possibly less foam, but the foam may be “tighter”.
0 = no foam or no air during steaming
6 = maximum foaming or air from the beginning to the end of steaming