27
RAM 100 • 1000 • 5500
RAMSET
www.ramsetinc.com
IMPORTANT INFORMATION FOR THE HOMEOWNER
• Ask your technician about all the features of your new
Ramset gate operator.
• This operator should not be installed without at least one
photo eye present.
• Other safety devices, such as reverse loops, phantom
loops, additional photo eyes, or miller edges may need to
be installed on your gate before the operator may be used.
Ask your technician which safety devices best suit your
safety needs.
•
Read your warranty certificate and fill out your warranty
extension card. Return the warranty card, via certified
mail, to Ramset within 90 days of purchase:
Ramset Automatic Gate Systems, Inc.
9116 De Garmo Ave.
Sun Valley, CA 91352
• All warranty issues/claims must be redeemed by a
technician.
• Homeowners should NEVER take the cover off the gate
operator.
• Homeowners should NEVER try to work on, repair or
service the gate operator.
• Never let children operate or play with gate controls. Keep
the controls away from children.
• Never let children play in the area around the gate.
• Never let anyone ride, climb under or climb over the gate.
• Always keep people, children and objects away from the
gate while the gate is in operation. No one should cross
the area of a moving gate.
• The entrance is for vehicles only. Pedestrians should use
a separate entrance.
• Use the emergency release only when the gate is not
moving. Make sure before using the foot pedal release,
the circuit breaker for the operator is turned off.
• Have the technician give you a demonstration of how to
use the emergency release.
• Make sure that in your breaker box, the breaker for the
operator is clearly marked and that you are aware of how
to disable and enable the breaker.
•
Keep gates properly maintained. Have a qualified gate
technician service the gate operator and gate hardware
every six months to a year. This includes checking of
safety devices, E.R.D. and battery backup systems...etc.
• Frequently test and check all safety devices.
• Periodically test and check the battery backup and
emergency release systems.
• Keep the gate operator area free of debris.
• Keep the area clean and pest free (insects and rodents
can cause serious damage to the operator which is not
covered under warranty).
• Warning signs must be placed on both sides of every gate
in a highly visible area.
• To reset the audible alarm on the gate operator you
must turn the circuit breaker for the operator off for
approximately 10 seconds, and then back on. An exterior
switch or button can also be installed on the operator to
shut off the audible alarm.
• Always keep a good relationship with your technician and
keep his or her number handy for future maintenance or
emergencies.
