4. Push clamp handles upward to the clamped position
to properly engage the clamps.
NOTE:
Once clamped, be sure the clamps are not improp-
erly attached to the truck bed flange.
5. Disengage the stowage straps.
6. Unfold the center and rear panels to the intermedi-
ate position.
NOTE:
When folding the center and rear panels, the sec-
tions
MUST
be held together to avoid damage to the
cover material.
7. Completely unfold the Tonneau Cover.
8. Pull the rear clamp handles down into the released
position.
Clamped Position
Improper Clamp Position
Intermediate Position (Vehicle Cannot Be Driven)
Incorrect Folding — Will Cause Damage
Correct Folding — Hold Panels Together
Fully Unfolded Position
82
GETTING TO KNOW YOUR VEHICLE
