This functionality is only available for radios equipped
with a Satellite receiver. To receive satellite radio, the
vehicle needs to be outside with a clear view to the sky.
If the screen displays Acquiring Signal, you may need to
change the vehicle’s position to receive a signal. In
most cases, the satellite radio does not receive a signal
in underground parking garages or tunnels.
Setting Presets
The Presets are available for all Radio Modes and are
activated by pressing any of the four Preset buttons on
the touchscreen, located at the top of the screen.
When you are receiving a station that you wish to com-
mit into memory, press and hold the desired numbered
button on the touchscreen for more than two seconds
or until you hear a confirmation beep.
The Radio stores up to 12 presets in each of the Radio
modes. Four presets are visible at the top of the radio
screen.
Audio Settings
1. Push the SETTINGS button on the right side of the
radio faceplate. If the settings button is not present,
push the MORE button on the faceplate, then the
Settings button on the touchscreen.
2. Scroll down and press the Audio button on the
touchscreen to open the Audio menu.
3. The Audio Menu shows the following options for you
to customize your audio settings:
○
Auto Play
— Press the Auto Play button on the
touchscreen to select between ON or OFF. This
feature determines if music automatically starts
playing from a device when it is first connected
to the Media hub’s USB port.
○
Equalizer
— Press the Equalizer button on the
touchscreen to adjust the Bass, Mid and Treble.
Use the + or – button on the touchscreen to
adjust the equalizer to your desired settings.
Press the Back Arrow button on the touchscreen
when done.
○
Balance/Fade
— Press the Balance/Fade but-
ton on the touchscreen to adjust the sound
from the speakers. Use the Arrow button on the
touchscreen to adjust the sound level from the
front and rear or right and left side speakers.
Press the Center C button on the touchscreen to
reset the balance and fade to the factory set-
ting. Press the Back Arrow button on the touch-
screen when done.
○
Speed Adjust Volume
— Press the Speed
Adjusted Volume button on the touchscreen to
select between “OFF”, “1”, “2” and “3”. This will
decrease the radio volume relative to a
decrease in vehicle speed. Press the Back
Arrow button on the touchscreen when done.
○
Loudness
— Press the Loudness button on the
touchscreen to select the Loudness feature.
When this feature is activated, it improves
sound quality at lower volumes.
Clock Settings
1. Push the SETTINGS button on the faceplate, or push
the MORE button on the faceplate, and then the
SETTINGS button on the touchscreen.
2. Select the Clock and Date button on the
touchscreen.
3. Next, select Set Time to change the time.
4. Select Set Date to change the date.
5. To set the time, select the Seek Up or Seek Down
arrows as appropriate. Select “12 hrs vs 24 hrs”,
“AM” or “PM” or select the “Time Zones”
(if equipped).
6. Select the Done button when complete.
MEDIA MODE
Operating Media Mode
Media Mode is entered by pushing the MEDIA button
located on the faceplate.
Media Mode
1 — Seek Down
2 — Seek Up
3 — Additional Functions
4 — Info
5 — Pause/Play
6 — Source
7 — Browse
390
MULTIMEDIA
