Rear View Camera
Pressing the Backup Camera soft key will
provide a full screen rear view with Zoom
View.
NOTE:
If the Backup Camera view was selected through the
Surround View menu, exiting out of the Rear View Cam-
era screen will return to the Surround View screen. If
the Backup Camera was manually activated through
the Controls menu of the Uconnect system, exiting out
of the display screen will return to the Controls menu.
Cargo Camera
Pressing the Cargo Camera soft key will pro-
vide a full screen view of the cargo area.
NOTE:
If the Cargo Camera view was selected through the Sur-
round View screen, exiting out of the Cargo Camera
screen will return to the Surround View screen. If the
Cargo Camera was manually activated through the Con-
trols menu of the Uconnect system, exiting out of the
display screen will return to the Controls menu.
Trailer Reverse Guidance
Pressing the Trailer Reverse Guidance soft
key will provide a full screen view of the
cargo area and trailer.
Pressing the Left & Right Tow Mirror Split
Screen View button within the Trailer
Reverse Guidance screen will display a split
screen to allow the driver to see both sides of the trailer
at the same time. This view allows the driver to pan
left/right to better frame the trailer in the image.
NOTE:
Trailer Reverse Guidance can only be selected through
the Surround View screen; exiting out of the Trailer
Reverse Guidance screen will return to the Surround
View screen.
Zoom View
When the Rear View Camera image is being
displayed, and the vehicle speed is below
8 mph (13 km/h) while in any gear, Zoom
View is available. By pressing the “magnify-
ing glass” icon in the upper left of the display screen,
the image will zoom in to four times the standard view.
Pressing the icon a second time will return the view to
the standard Backup Camera display.
When Zoom View is selected while the vehicle is in
REVERSE, then shifted to DRIVE, the camera delay view
will display the standard Backup Camera view. If the
vehicle is then returned to REVERSE gear from DRIVE,
the Zoom View selection will automatically resume.
Shifting to NEUTRAL from any gear will maintain the
selected view (Zoom or Standard) as long as the vehicle
is below 8 mph (13 km/h).
Zoom View is available until the gear selector is placed
in DRIVE or REVERSE and speeds are at or above
8 mph (13 km/h).
NOTE:
•
If the vehicle is in DRIVE, NEUTRAL, or REVERSE,
and speed is greater than or equal to 8 mph
(13 km/h), Zoom View is unavailable and the icon
will appear gray.
•
While in Zoom View, the guidelines will not be
visible.
Deactivation
The system is deactivated in the following conditions if
it was activated
automatically:
•
When the vehicle is shifted out of REVERSE (with
camera delay turned on), the camera image will con-
tinue to be displayed for up to 10 seconds, unless
the vehicle speed exceeds 8 mph (13 km/h), the
vehicle is shifted into PARK or the ignition is placed
in the OFF position. There is a touch screen button
“X” to disable the display of the camera image.
•
When the vehicle is shifted out of REVERSE (with
camera delay turned off), the Surround View Cam-
era mode is exited and the last known screen
appears again.
The system is deactivated in the following conditions if
it was activated
manually
from the Uconnect controls
menu via the Surround View button, Backup Camera
button, Cargo Camera button or Forward Facing Cam-
era button:
•
The "X" button on the display is pressed
•
Vehicle is shifted into PARK
•
Ignition is placed in the OFF position
•
Vehicle speed is over 8 mph (13 km/h) for
10 seconds
NOTE:
If the Surround View Camera, Cargo Camera, Backup
Camera, or Forward Facing Camera is activated manu-
ally, and the vehicle is shifted into REVERSE, deactiva-
tion methods for automatic activation are assumed.
230
STARTING AND OPERATING
