380
IN CASE OF EMERGENCY
Jack Warning Label
1. Remove the spare tire, jack, and tools from
the stored location.
2. Using the lug wrench, loosen the wheel nuts
(but do not remove), by turning them counter
-
clockwise one turn while the wheel is still on
the ground.
3. Assemble the jack and jacking tools. Connect
the jack handle driver to the extension, then to
the lug wrench.
Assembled Jack And Tools
4. Placement for the front and rear jacking
locations are critical. See below images for
proper jacking locations.
Jack / Extensions Placement
Front Jacking Location
When changing a front wheel, place the
scissor jack under the rear portion of the
lower control arm as shown. Access the
front jacking location from behind the front
tire.
Front Lifting Point
CAUTION!
Do not attempt to raise the vehicle by jacking on
locations other than those indicated in the
Jacking Instructions for this vehicle.
22_DT_OM_EN_USC_t.book Page 380
Содержание 1500 2022
