RAM 1500 2022, Руководство пользователя

Страница: 177 / 496

STARTING AND OPERATING 175

The transmission is not in DRIVE

Hood is open

Transfer case is in 4WD LOW

TOW/HAUL mode is selected

Accelerator pedal input

Excessive 12 Volt loads

Brake application is adequate to obtain and
maintain a stop
It may be possible to operate the vehicle several
consecutive times in extreme conditions and not
meet all criteria to enable an Autostop state.
T
O
S
TART
T
HE
E
NGINE
W
HILE
I
N
A
UTOSTOP
M
ODE
While in DRIVE, the engine will start when the
brake pedal is released or the throttle pedal is
pressed and the transmission will automatically
reengage upon engine restart.
Conditions That Will Cause The Engine To Start
Automatically While In Autostop Mode
The engine will start automatically when:

The transmission selector is moved from DRIVE
to REVERSE, NEUTRAL, or PARK

To maintain cabin temperature near the HVAC
settings

HVAC is set to full defrost mode

12 Volt demand requires engine restart

Stop/Start OFF switch is pushed

Transfer case is in 4WD LOW

The emissions system override is present

A Stop/Start system error is present
Conditions That Force An Automatic Shift To Park
While In Autostop Mode
The engine will not start automatically and the
transmission will be placed in PARK if:

The driver door is open and brake pedal
released

The driver door is open and the driver seat belt
is unbuckled

The engine hood has been opened

A Stop/Start system error is present
The engine may then be restarted by moving the
transmission shift selector out of PARK (e.g., to
DRIVE) or, in some cases, only by a key start. The
instrument cluster will display a “SHIFT OUT OF
PARK” message, or a “STOP/START KEY START
REQUIRED” message, to indicate which action is
required
Ú
page 114.
T
O
M
ANUALLY
T
URN
O
FF
T
HE
S
TOP
/
S
TART
S
YSTEM
Stop/Start OFF Switch
Push the Stop/Start OFF switch (located on the
switch bank). The light on the switch will illuminate.
The “STOP/START OFF” message will appear in the
instrument cluster display and the Autostop mode
will be disabled
Ú
page 114.
NOTE:
The Stop/Start system will reset itself back to the
ON position every time the ignition is turned OFF
and back ON.
T
O
M
ANUALLY
T
URN
O
N
T
HE
S
TOP
/
S
TART
S
YSTEM
Push the Stop/Start OFF switch (located on the
switch bank). The light on the switch will turn off.
4
22_DT_OM_EN_USC_t.book Page 175