RAM Commercial ProMaster 2015 Скачать руководство пользователя страница 8 | Manualshive

Страница: 8 / 431

RAM Commercial ProMaster 2015 Скачать руководство пользователя страница 8

WARNINGS AND CAUTIONS

This Owner’s Manual contains

WARNINGS

against

operating procedures that could result in a collision or
bodily injury. It also contains

CAUTIONS

against proce-

dures that could result in damage to your vehicle. If you
do not read this entire Owner’s Manual, you may miss
important information. Observe all Warnings and Cau-
tions.

VAN CONVERSIONS/CAMPERS

The New Vehicle Limited Warranty does not apply to
body modifications or special equipment installed by van
conversion/camper manufacturers/body builders. Refer
to the Warranty Information book, Section 2.1.C. Such
equipment includes video monitors, VCRs, heaters, stoves,
refrigerators, etc. For warranty coverage and service on
these items, contact the applicable manufacturer.

Operating instructions for the special equipment in-
stalled by the conversion/camper manufacturer should
also be supplied with your vehicle. If these instructions
are missing, please contact your authorized dealer for
assistance in obtaining replacement documents from the
applicable manufacturer.

For information on the Body Builders Guide refer to:
www.rambodybuilder.com. This website contains di-
mensional and technical specifications for your vehicle.
It is intended for Second Stage Manufacturer’s technical
support. For service issues, contact your authorized dealer.

VEHICLE IDENTIFICATION NUMBER

The Vehicle Identification Number (VIN) is found on the
left front corner of the instrument panel, visible through
the windshield. This number also appears on the vehicle

6

INTRODUCTION

«
...
6
7
8
9
10
...
»

Содержание ProMaster 2015
















































































































































































































































































































































































































































Отзывы:

Нет отзывов