RAM Commercial ProMaster 2015 Скачать руководство пользователя страница 386

Страница: 386 / 431

16. Carefully reinstall screw (1) on lower headlamp filler

panel.

17. Carefully reinstall screws (2) on upper headlamp

filler panel.

Front Turn Signal/Parking Lamps

NOTE:

Passenger side headlamp must be removed for

bulb replacement, for driver side headlamp go to step 6
through step 7.

1. Remove screw (1) on lower headlamp filler panel.

2. Remove screws (2) on upper headlamp filler panel.

3. Remove upper screw (1) from headlamp housing.

4. Remove lower screws (2) from headlamp housing.

5. Pull Headlamp forward.

6. Rotate the bulb counter clockwise and remove.

7. Install the bulb into socket, and rotate bulb/socket

clockwise into lamp locking it in place.

8. Carefully reinstall headlamp in the same position on

the vehicle, so as not to affect headlamp aiming.

9. Install upper screw (1) on headlamp housing.

10. Install lower screws (2) on headlamp housing.

11. Carefully reinstall screw (1) on lower headlamp filler

panel.

12. Carefully reinstall screws (2) on upper headlamp

filler panel.

384

MAINTAINING YOUR VEHICLE

Содержание ProMaster 2015
















































































































































































































































































































































































































































Результаты поиска

Содержание ProMaster 2015

Отзывы:

RAM Commercial ProMaster 2015, Руководство пользователя, Страница: 386 / 431

Результаты поиска

Содержание ProMaster 2015

Отзывы: