RAM Commercial ProMaster 2015 Скачать руководство пользователя страница 60 | Manualshive

Страница: 60 / 431

RAM Commercial ProMaster 2015 Скачать руководство пользователя страница 60

Installing Child Restraints in Commercial Vehicles

This commercial vehicle is not designed for use as a
family vehicle and is not intended for carrying children
in the front passenger seat(s). Never install rearward-
facing child restraints in this vehicle. Although the seat
belt can be locked to secure a child restraint, there are no
tether anchorages to complete the proper installation of a
forward-facing child restraint. If you must carry a child
in a forward-facing child restraint, the passenger seat
should be moved to the full rearward position and the
child must be in a proper restraint system based on its
age, size and weight. Follow the instructions below to
secure the child restraint using the seat belt.

WARNING!

Rearward-facing infant restraints must never be
secured in the passenger seat of a vehicle with a

(Continued)

WARNING!

(Continued)

passenger Air Bag. In a collision, a passenger Air Bag
may deploy causing severe injury or death to infants
riding in rearward-facing infant restraints.

Installing Child Restraints Using the Vehicle Seat Belt

The seat belts in the passenger seating positions are
equipped with a Switchable Automatic Locking Retractor
(ALR) that is designed to keep the lap portion of the seat
belt tight around the child restraint so that it is not
necessary to use a locking clip. The ALR retractor can be
“switched” into a locked mode by pulling all of the
webbing out of the retractor and then letting the webbing
retract back into the retractor. If it is locked, the ALR will
make a clicking noise while the webbing is pulled back
into the retractor. For additional information on ALR,
refer to the “Automatic Locking Mode” description un-
der “Occupant Restraints.”

58

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

«
...
58
59
60
61
62
...
»

Содержание ProMaster 2015
















































































































































































































































































































































































































































Отзывы:

Нет отзывов