RAM Commercial ProMaster 2015 Скачать руководство пользователя страница 179 | Manualshive

Страница: 179 / 431

RAM Commercial ProMaster 2015 Скачать руководство пользователя страница 179

Doors & Locks

After pressing the “Doors & Locks” button on the touch-
screen the following settings will be available:

•

Auto Door Locks

When this feature is selected, all doors will lock auto-
matically when the vehicle reaches a speed of 12 mph
(20 km/h). To make your selection, press the “Auto
Lock” button on the touchscreen, then choose “Yes” or
“No.” The button will highlight indicating that the set-
ting has been selected. Press the back arrow/Done button
on the touchscreen to return to the previous menu.

Audio

After pressing the Audio button on the touchscreen the
following settings will be available:

•

Balance

This feature allows you to adjust the Balance settings.
Press and drag the speaker icon, use the arrows to adjust,
or tap the speaker icon to readjust to the center.

•

Equalizer

This feature allows you to adjust the Bass, Mid and Treble
settings. Adjust the settings with the “–” or “+” arrow
buttons on the touchscreen or by selecting any point on
the scale between the Up and Down arrow buttons on the
touchscreen. Then press the back arrow/Done button on
the touchscreen.

NOTE:

Bass/Mid/Treble allow you to simply slide your

finger up or down to change the setting as well as press
directly on the desired setting.

•

Speed Adjusted Volume

This feature increases or decreases volume relative to
vehicle speed. To change the Speed Adjusted Volume
press the Off, 1, 2 or 3 button on the touchscreen. Then
press the back arrow/Done button on the touchscreen.

4

UNDERSTANDING YOUR INSTRUMENT PANEL

177

«
...
177
178
179
180
181
...
»

Содержание ProMaster 2015
















































































































































































































































































































































































































































Отзывы:

Нет отзывов