RAM Commercial ProMaster 2015 Скачать руководство пользователя страница 44 | Manualshive

Страница: 44 / 431

RAM Commercial ProMaster 2015 Скачать руководство пользователя страница 44

Knee Impact Bolsters

The Knee Impact Bolsters help protect the knees of the
driver and front passenger, and position the front occu-
pants for improved interaction with the Advanced Front
Air Bags.

WARNING!

•

Do not drill, cut, or tamper with the knee impact
bolsters in any way.

•

Do not mount any accessories to the knee impact
bolsters such as alarm lights, stereos, citizen band
radios, etc.

Supplemental Side Air Bags

Your vehicle is equipped with two types of supplemental
Side Air Bags:

•

Supplemental Seat-Mounted Side Air Bags (SABs):

Located in the outboard side of the front seats. The
SABs are marked with a “SRS AIRBAG” or “AIRBAG”
label sewn into the outboard side of the seats.

Supplemental Seat-Mounted Side Air Bag Label

42

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

«
...
42
43
44
45
46
...
»

Содержание ProMaster 2015
















































































































































































































































































































































































































































Отзывы:

Нет отзывов