RAM Commercial ProMaster 2015 Скачать руководство пользователя страница 319 | Manualshive

Страница: 319 / 431

RAM Commercial ProMaster 2015 Скачать руководство пользователя страница 319

WARNING!

To avoid the risk of forcing the vehicle off the jack,
do not tighten the wheel nuts fully until the vehicle
has been lowered. Failure to follow this warning may
result in personal injury.

NOTE:

Do not install the wheel cover on the spare tire.

7. Lower the vehicle by turning the jack screw to the left.

8. Refer to “Torque Specifications” in this section for

proper wheel lug bolt torque.

9. Lower the jack to its fully-closed position.

10. Stow the damaged wheel/spare tire with the cable

and wheel spacer before driving the vehicle.

11. Install the winch extension and

rotate the wrench

handle clockwise until the winch mechanism indi-
cation window turns yellow and the operator hears
“3 clicks” from the device to show the wheel is
properly stowed under the vehicle.

Mounting Spare Tire

6

WHAT TO DO IN EMERGENCIES

317

«
...
317
318
319
320
321
...
»

Содержание ProMaster 2015
















































































































































































































































































































































































































































Отзывы:

Нет отзывов