RAM Commercial ProMaster 2015 Скачать руководство пользователя страница 272 | Manualshive

Страница: 272 / 431

RAM Commercial ProMaster 2015 Скачать руководство пользователя страница 272

ADDING FUEL

Fuel Filler Cap (Gas Cap)

The gas cap is located behind the fuel filler door on the
left side of the vehicle. If the gas cap is lost or damaged,
be sure the replacement cap is for use with this vehicle.

CAUTION!

•

Damage to the fuel system or emissions control
system could result from using an improper fuel
tank filler tube cap. A poorly fitting cap could let
impurities into the fuel system and may cause the
“Malfunction Indicator Light (MIL)” to turn on,
due to fuel vapors escaping from the system.

•

To avoid fuel spillage and overfilling, do not “top
off” the fuel tank after filling.

WARNING!

•

Never have any smoking materials lit in or near the
vehicle when the gas cap is removed or the tank is
being filled.

(Continued)

Fuel Filler Cap

270

STARTING AND OPERATING

«
...
270
271
272
273
274
...
»

Содержание ProMaster 2015
















































































































































































































































































































































































































































Отзывы:

Нет отзывов