Raise3D Pro3 Plus, Руководство пользователя

Страница: 19 / 44

Pro3 Series 3D Printer / User Manual
F.
Hardware Installation
Open the front door, and remove the
starter box and filament box from the
printer's base.
Open these packages, and compare
them with the following Raise3D
Supplies and Accessories list.
7
When the touch screen displays the
"Home" screen, the printer is ready.
Once the unit is powered on, the printer
will go through a start-up sequence.
Your Raise3D printer will take approxi-
mately 60 seconds to boot up. When the
touch screen displays the "Home"
screen, the printer is ready.
5
Tap the "Utilities" tab, and press the Z
Homing button.
Press OK for the print bed to begin to
"Home" to the origin position.
This will allow you to access your
accessory packages.
6
16