7
(F) TROUBLESHOOTING
PROBLEM
SOLUTION
Saddle valve is leaking
1)
Turn valve handle clockwise to shut water off
2)
Make sure that the ferrule and sleeve is correctly installed as per fig 8
3)
Fully tighten the compression nut to make sure seal is made
4)
Turn valve handle counter clockwise to start water flow
5)
If problem persists, call Rainfresh for assistance
Flow rate is very slow
after installation of unit
You may not have pierced the water pipe fully. Turn valve handle clockwise all
the way until it can go no further to make sure that valve needle has fully pierced
the water pipe.
Call Rainfresh to review installation procedure
There are some black
fines in the water
Some carbon fines may persist for several days. These are harmless and frequent
running of the unit will clear them more quickly. Running the unit for extended
periods of time will NOT help.
Water appears milky after
installation or after
replacing cartridges
Water can appear milky after a new cartridge is installed because of tiny air
bubbles coming out. These will clear out if you leave the water standing for a few
seconds and are harmless. After a few days of use the bubbles will slowly clear
away.
The cartridge came
undone from the head on
it’s own
This may indicate high water pressure or water hammer conditions exceeding
100 psi . You may need to install a pressure regulator (set at 60-70 psi max) and
a water hammer arrestor on the line. Call Rainfresh for further assistance
The faucet continues to
drip even after shut-off
1)
Replace faucet cartridge
2)
Call Rainfresh to order ceramic disc cartridge kit (1050-2)
Monitor does not light
up when I press the
button
If water is not running through the system and the monitor LED does not light
up, you may need to replace the battery (2545). Call Rainfresh to order
(G) PARTS LIST
PART #
DESCRIPTION
QTY
QLV
Replacement filter cartridge
1
726-0
¼” compression nut
2
1008-1 Saddle valve complete
1
1008-3 ¼” Delrin sleeve
2
1011-0 Mounting screw
2
1050-0 Faucet assembly complete
1
1050-2 Ceramic disc cartridge for faucet
1
1603
¼” tube insert
2
2545
Battery CR2032 (QS1 only)
1
2713
Head cover insert
1
2711-1 Monitor assembly (QS1 only)
1
2723
Cartridge top O-rings
2
2726
Sump O-ring
1
2727
QS1 head assembly complete
1
2730
¼” tubing
6 ft
