Rain Bird ESP-LXD, Инструкция по установке, программированию и эксплуатации

Страница: 64 / 138

58 ESP-LXD Controller
Set Up SimulStations
TM
To prevent the ESP-LXD controller from irrigating too many stations
simultaneously, you can set the maximum number of stations per
program that are allowed to run. This can be beneficial for systems with
a small water source and to help ensure uniform water distribution.
b d
CAUTION:
The ESP-LXD can run multiple programs and stations
concurrently. If all four programs are running two stations, then
theoretically 8 stations could be operating at the same time.
Many irrigation systems do not have sufficient hydraulic capacity
to accommodate such a load. SimulStations can be used to limit
the maximum number of stations per program or for the entire
controller, but in general we recommend enabling FloManager
and setting program-level and LXD-level SimulStations to a fairly
high number. This will allow FloManager to provide maximum
irrigation based on your system’s hydraulic capacity. Consult the
FloManager portion of this manual in Section F and Appendix C
for additional details.
Set SimulStations TM for Program
b g
Turn the controller dial to Station Settings.
A
The Station Settings screen appears. Press the Down Arrow button
to select SimulStations; then press Next.
B
The Station Settings screen appears with PGM SimulStations
selected; press Next.
1 2
C
The Maximum Number of SimulStations screen appears. Press the
+ and – buttons to set the maximum number of irrigation stations
(from 1 to 8) that can operate simultaneously for this program;
then press Next.
3
b e
Change the Program Select switch and repeat this process to set
the Maximum Number of Stations for other programs as desired.