Rain Bird ESP-LXD, Инструкция по установке, программированию и эксплуатации

Страница: 106 / 138

100 ESP-LXD Controller
Clear Programs
The ESP-LXD controller allows you to clear an individual
Program, all of your Programs or Restore the controller to it’s
factory default condition.
b d
CAUTION:
It’s recommended to back up your Programs before
clearing them. The ESP-LXD controller’s built in Store Programs
feature can backup one set of programs. See Section E, Backup
and Recall for more details.
b b
NOTE:
Irrigation start days, Start Times and station Run Times will
no longer be present for the cleared Programs. If no Programming
exists then an Alarm will be displayed. See Section A, Alarm
Conditions for more details.
Clear Individual Program
b g
Turn the controller dial to Clear Programs.
A
The Clear Programs screen appears with Individual Program
selected; press Next.
B
A confirmation screen appears. To clear the selected Program,
press and hold down the Yes button for four seconds. If you’re not
sure, press No.
b b
NOTE:
If the desired Program is not selected, use the Program
Select switch to change it. See Program Selection in Section A for
more details.
1 2
C
A confirmation screen appears.
3
b e
Change the Program Select switch and repeat this process to clear
other Programs.