STARDOM IDE RAID Solution
14
Setup RAID 0
If replacing an old HDD with a new one, we recommend to
purchase the same brand disk for the usage of RAID 0 Mode.
Ÿ
The capacity of the two drives is combined to become one
logical drive.
Ÿ
The capacity of the logical drive is the double capacity of the
minimum physical drive.
Ÿ
RAID 0 does not provide data redundancy.
Ÿ
RAID 0 Mode cannot be performed when SR3500 perform
RAID 1 mode. In other words, you can only choose one
between the two Mode RAID 1 or RAID 0 at the starting.
Ÿ
When choosing RAID 0 Mode, do not turn the power on
unless you have installed the two HDDs in the removable
carrier and insert them to fix well.
Ÿ
It is highly recommended that you should replace new HDDs if
you want to change RAID 0 Mode to RAID 1 unless all the
stored data will be destroyed.
