STARDOM IDE RAID Solution
16
3-2 Windows PC Operation
Once the SR3500 Hardware installation is complete, you can start
connect the device to your PC.
1. Find the IEEE 1394 or USB2.0 port on the rear panel of your
PC.
2. Connect the IEEE 1394 cable to the IEEE 1394 port of
SR3500 or the USB2.0 cable to the USB2.0 port of SR3500.
3. Connected RS232 cable to your PC COM port and RS232
port on the rear panel of SR3500.
4. Attach the power cord to the SR3500.
5. Power on your PC. (if it is off)
6. Power on the SR3500 and make sure LCD display right.
7. Wait a few seconds, then Windows 98SE / Windows ME /
Windows 2000 or Windows XP will detect the device
automatically. If running Windows SE, you maybe asked to
insert the Windows 98 SE CD-ROM. This will update the
device drivers.
8. Check on Stop or Eject device icon on the task bar to verify
the device is present.
9. If running Windows 98 SE, you need to download the update
patch from Microsoft web site at
http://windowsupdate.micrsoft.com
http://www.micrsoft.com/windows98/downloads/corparate.asp
