STARDOM IDE RAID Solution
25
Appendix A
Questions & Answers
Q1: What happens if power is shut down while the SR3500 is
running auto rebuilding?
A:
In case of power failure during the
Auto-Rebuild
Function at
RAID 1 Mode, controller will remember the rebuilding
progress percentage and carry on the operations when the
power is restored.
Q2: When using the SR3500, the computer system is unable
to read/write properly.
A:
1.Check if the external cable connector is inserted properly.
2.
Check all disk in SR3500 are ready.
Q3: The buzzer alarm keeps sounding during SR3500
operation.
A:
1.Check LCD if all disk are ready inserted into the right
position.
2. Check whether F or T character display on LCD or
not.
Q4: How to turn on/off the buzzer?
A:
1. The factory default of the buzzer on/off switch is ON.
2. Use a sharp pointed object to turn off buzzer alarm on the
front panel (Refer to Section 2-4 Part Description)
3. Use a sharp pointed object to turn on buzzer alarm on the