STARDOM IDE RAID Solution
26
front panel.
Q5: Why do the responses of the computer system slow
down when SR3500 is under rebuilding at RAID 1
Mode?
A:
The performance of computer system is related to CPU,
motherboard design and peripherals. SR3500 will slow
down Computer performance.
Q6: How is the HDD capacity configured when replacing with
a new disk at RAID 1 Mode?
A:
1. SR3500 is configured to the least capacity detected when
SR3500 is installed for the first time.
2. When larger capacity is replaced in SR3500, the HDD
capacity of SR3500 remains unchanged.
Q7 Why it is error when I put in the second HD at RAID 1?
A:
1. The second HD’s capacity must bigger than the first one
otherwise system can not rebuilding the data into the second
one.
2. If the system error message shows rebuilding error pri (s)
→
sec (s) or sec (s)
→
pri (s), it represent you have once
put the HD into system alone, which occurred the two HDs
already become the source HD, therefore system can not
determine the priority should be pri
→
sec or sec
→
pri.
This time you need to make sure which disk is source, then
put it into SR3500 only. After turn SR3500, put another one
into SR3500. It will proceed auto rebuilding normally.
